Lisna Waters LWW3 1700mm x 900mm Steam Shower Cabin Whirlpool and Airspa Bath - White by Lisna Waters

Lisna Waters LWW3 1700mm x 900mm Steam Shower Cabin Whirlpool and Airspa Bath - White

The perfect mix of bow fronted bath with whirlpool, shower with stainless steel monsoon, multi function hand shower and body jets and a steam system rolled into one. 

Fitted with a stylish white electronic control pad that provides easy, fingertip access to the steam functions, bluetooth audio system, choma lighting and circulation fan. 

Product Information:

• 1700mm x 900mm x 2180mm
• 16 Jet Whirlpool and Airspa System
• Designer top stainless steel rain shower
• Hand shower on riser rail
• 6 adjustable body jets
• 3kw steam generator
• Touch control panel
• Whirlpool bath system
• 1 HP whirlpool pump
• Colour Underwater Bath Lighting - 7 Changing Colours
• Chromatherapy LED Ceiling lighting
• LED Central Column Lighting
• Integrated moulded seat
• Chrome Steam Pod with Aromatherapy - Allows you to add fragrance to your spa experience
   
• Reinforced bath base - Encapsulated Baseboard and Under bath steel frame
• White glass interior (Black Glass Option)
• 5mm clear glass doors
• 5mm clear glass front sides
• 3-dial shower valve
• Vernet thermostatic sensor for higher grade water temperature regulation
• Chrome Bath Filler
   
• WRAS water hoses
• Ozone sterilization system
• Easyclean glass protection - Pre-applied during manufacturing It helps makes cleaning a lot easier and is water resistant making it easier to clean the glass, simply use warm soapy water to clean no hard abrasive cleaners need to be used.
• FM radio with bluetooth - allows you to stream music to your shower cabin from your favorite music mobile / tablet bluetooth device
• Circulator fan
• Modern Glass toiletries shelf
• Chrome bath filler
• Includes standard fitting kit
   
• 6 Year Extended Parts Warranty upon registration*
• Operates at Pressures of 1.8 - 3.5 Bar
• Flow rate of 12/14 litres per minute minimum required
• We Highly Recommend Pressure Equalising Valve for use with Combi Boilers to Ensure Balanced Hot & Cold water is supplied to shower unit.
• Operates at Pressures of 1.8 - 3.5 Bar - We recommend the Salamander ESP75 2.2 bar Shower Pump
• Free Specially Adapted Waste Trap Included Saving you over ?29.98.
• Free Vernet Sensor Thermostatic Valve  allows you to regulate safely the water temperature. Saving you over ?28.
• Optional Water Softener - Little Plumber is a compact, computerised electronic water softener which will descale your existing system, prevent new scale forming and save you money from the moment it is installed. Your water will also feel softer so no need for a traditional water softener.
• Optional PEV - Pressure Equalising Valve is designed to Balance the hot & cold water pressures for use with Combi Boilers to ensure your shower is protected against un-balanced hot & cold water pressures.  Check Here for PEV Product Info

Special Notes:

Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.

Installation Notes:

Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.

Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1.5-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply pumps. The steam cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.

Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location.All Measurements and weights are for guidance only. Package dimensions may change without notification. Whilst every effort is made to ensure this information is kept up to date, design and features are subject to change without notification.