Cramer Ceramic, Enamel & Acrylic Repair 50ml Spray - Whisper Pink

For covering repairs & unsightly marks on Acrylic, Enamel, Ceramic, Fibreglass and Resin Stone surfaces.

For professional and cost-saving repairs when ease and perfect results are important.

Each Cramer Repair Spray can be used to cover repairs on:

• Acrylic (Baths)
• Enamel (Steel/Cast Baths)
• Ceramic (Sanitaryware)
• Fibreglass (Baths)
• Resin Stone (Shower Trays

Easy to use to cover repairs & unsightly marks.

• Clean area thoroughly before you start
• Shake can vigorously for 3 mins
• Spray a sample area first ( min working temperature 20c /64f )
• Apply the spray thinly from a distance of 15 - 20 cm

Tip:

Even coverage is easier to achieve if you use a mask cut from paper, just cut to size of area being sprayed. For larger areas mask surrounding area.

Hold the mask about 1 - 2 cm in front of the damaged area and start spraying onto the mask, before directing the spray with light movements over the cut out area.

Wait one minute and apply the next coat. Repeat this process until the damaged area has been completely covered.

To remove drips or runs you can use Acetone ( follow manufacturers instructions )

The repaired area can be polished with either Email Star or Acryl star polish after four days.

The item contains an Aerosol which is prohibited by Royal Mail, most standard Couriers & Air Mail services.
We can only deliver to UK mainland addresses via specialist carrier, therefore a £3.50 additional delivery surcharge will be applied at checkout.