Salamander Pump RSP 100 TU 3.0 Bar Twin For Positive and/or Negative Head Systems
Perfect For Steam Showers, Hydro Showers, Whirlpool Baths & Shower Towers
Salamanders premium range of shower and whole house pumps, these pumps take away the confusion of which pump to buy for the respective plumbing system, as they will automatically detect whether the installation is in positive or negative heads. The RSP TU pumps are a result of extensive research to develop these advanced pumps that incorporate micro-electronic technology and sensors. Quiet running relative to other shower pump types, they are reliable and high in quality.
This product was formerly known as ESP100CPV.
The RP100TU pump is a 3.0 bar twin universal centrifugal shower pump suitable for boosting water performance in a gravity fed, negative and positive head system.
With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or whole house appliances. This pump is suitable for use across a wide range of shower types and heads up to 200mm as well, including Victorian, multi-function and showers with massage function or champagne spray. AV couplers with isolating valves are included.
All of Salamander Right Pump Universal pumps are protected by the following patent: Low Water Starvation Protection - GB2402444B.
Guarantee | 3 years |
WRAS Approval | 1810090 |
Pump Type | Centrifugal |
Noise | 55.5dBA* |
Mechanical Seal | Nitrile/Carbon/Ceramic |
Anti-vibration feet | Yes |
Inlet isolators | Yes |
Flexible Hoses | 4 |
Pressure @ closed head | 3.0 bar |
Pressure @ 8lpm | 2.85 bar |
Pressure @ 16lpm | 2.65 bar |
Maximum water Temperature | 65°C |
Pump connections | 3/4" BSP |
Pressure vessel air pre-charge | 20 psi |
Hose connections (UK model) | 3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses |
Hose connections (ROI model) | 3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses |
Motor type | A.C Induction |
Motor duty rating | Continuously rated |
Power supply | 230V |
Current (full load) | 4.6 amps |
Power consumption | 1045 watts |
Fuse rating | 5 Amps |
Power cable (pre-wired) | 1.5 metres |
Enclosure protection (IP rating) | IPX2 |
Length | 415 mm |
Width | 148 mm |
Height (Excluding hoses) | 317 mm |
Weight (Excluding hoses) | 9.91 kg |
Designed specifically for one/two bathroom systems where there is a need to boost baths, basins or showers which may be above and/or below the cold water storage tank(s).
Typically - flats, loft and barn conversions
Send us an email but include the URL of the other company whom you want us to try and Price Match with, please note we do not usually try to price match against any auction sites.
We always aim to reply within 2-4 Working hours if not faster. We need to be able to verify the competitors price, delivery cost and product availability to allow us to check if we can offer a price match.**
* Denotes required information
** Please note that we cannot offer a price match retrospectively after an order is placed or on orders that have already been dispatched or delivered.
Be the first to review this product.
Complete the form below and we’ll send the product details to a friend
Vat Relief
