Insignia GT9008S Quadrant Steam Shower Cabin Unit 950mm x 950mm Enclosure
This popular model has now been made larger for those with that little extra room. Measuring 950mm x 950mm x 2200mm with all the latest features to suite anybody's taste.
Please note this model does not have thermostatic water control valves we advise the installation of a pressure equalising valve to help regulate the hot and cold water pressures. (this will help if/when someone turns on the cold/hot water elsewhere)
Water supply requirement: separate hot and cold inputs are required, each at a pressure of 1.5 - 3 Bar. NB: if the water pressure is below this range a twin negative head pump must be used to boost the hot and cold supply.
Please note you must register your purchase on Insignia's Website this will ensure you receive your warranty and a speedy resolution should any problems ever arise.
A pump must not be used on the output of a combi boiler.
100mm clearance must be allowed for between the cabin roof and ceiling to allow adequate venting. It is essential that a fully qualified electrician and fully qualified plumber install the unit in accordance with current regulations. The product requires hard wiring into the mains.
*Please note that due to manufacturer improvements slight differences can occur when compared to images used such as control panel but all features are generally the same and are normally improved upon as a result in changes.