Insignia GT8004A Quadrant Steam Shower Cabin Unit 900mm x 900mm Enclosure

Insignia GT8004A Quadrant Steam Shower Cabin Unit 900mm x 900mm Enclosure

This cabin not only boasts a great deal of 21st century features, but is also ideal for the family who needs to save space and combine functionality.

Product Features

• Measure 900mm x 900mm x 2200mm
• Chrome mixing valve mechanism
• Hand shower
• Over head rain shower built into the enclosures roof
• Multi-functional mixer faucet
• 6 Hydro massage jets
• Built in FM Stereo
• Stereo speaker built into the enclosures roof
• 5mm Tinted Tempered Glass
• Internal Mood Lighting
• Extractor Fan
• Steam Generator
• Deep shower tray
• Acrylic base with steel frame and adjustable feet
• Easy Glide Doors With Magnetic Closer
• External Mood Lights
• Pre-moulded Seat
• MP3 Connection
• Hot and cold connections
• Can be connected to a combination boiler
• CE Certified
• ISO9001 Approved
• Combi Boiler Compatible, please ensure you use a Pressure Equalising Valve to Balance the hot & cold water pressures.
• We would recommend the Salamander ESP75 2.2 bar shower pump for use with this Shower
• Key Feature: Insignia Renowned 1 minute Fast start Steam Generator
• Key Feature: Insignia Steam pod found on the rear wall. Beware old models still have them under the plastic seat which can burn you!!
• Key Feature: Insignia Innovative "click clack" design build
• Key Feature: Insignia Comprehensive online build manual
• Key Feature: Insignia full customer services support
• Key Feature: Insignia dedicated technical help line
• Key Feature: Insignia UK based parts back up service
• Free Standard Fitting Kit - Comprises of: 2 x standard 1m braided hoses and standard shower cabin waste. For More Info - Click Here
  Upgrade to Premium Fitting Kit - Comprises of: 2 x 2m long braided hoses, PTFE Tape, 1 x clear silicone, 2 x isolating valves and special adapted waste. Add this accessory pack to your order for a special online price. For More Info - Click Here
• Free Thermostatic Valve - allows you to regulate safely the water temperature. Saving you over £28.
• iShower Compatible - Check Here for Product Info not Included as standard but is an optional extra, please see options.  If ordered with your steam shower you can save £10.
• Optional Water Softener - Little Plumber is a compact, computerised electronic water softener which will descale your existing system, prevent new scale forming and save you money from the moment it is installed. Your water will also feel softer so no need for a traditional water softener.
• STANDARD WASTE TRAP INCLUDED IN THE PRICE

Please note you must register your purchase on Insignia's Website this will ensure you receive your warranty and a speedy resolution should any problems ever arise.

A pump must not be used on the output of a combi boiler.

Installation guidelines:

100mm clearance must be allowed for between the cabin roof and ceiling to allow adequate venting. It is essential that a fully qualified electrician and fully qualified plumber install the unit in accordance with current regulations. The product requires hard wiring into the mains.

*Please note that due to manufacturer improvements slight differences can occur when compared to images used such as control panel but all features are generally the same and are normally improved upon as a result in changes.

Additional Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.

Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1.5-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply pumps. The shower cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.

Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location.

Click Here For The Steam Shower Warranty & Install FAQ