
![]() |
The walls and base of the shower pod are supplied in two sturdy cartons, which can easily be manoeuvred on site up stairwells and through doorways to the exact location. The pod is robustly constructed from GRP (glass reinforced polymer) and can be fitted by one man in the simple stages shown below. |
|
|
![]() |
![]() |
![]() |
|
| Position and fit the fixing batons to the wall. | The back panel can then be slotted into position and secured with a single screw. | ||
![]() |
![]() |
||
| Locate, level and fix the base. | Slot the side panels to the base and fix to the back wall batons, using the spacer provided to ensure that the correct gap is left for the back panel. | The front edges of the side panels can then be secured to the side wall batons and the fixing screws will be concealed by the door frame. | |
| Choose from two high performance stylish thermostatic mixer showers | ||||||||||
|
||||||||||
|
|
||||||||||
|
With all shower pods you have the choice of two top quality thermostatic mixer showers, a surface mounted bar mixer or a built-in concentric control mixer. Both feature separate flow and temperature controls and are suitable for both low and high pressure water systems from 0.1bar – 5bar. |
||||||||||
|
|
||||||||||
| Fitting the mixer | |||
![]() |
![]() |
|
Bar mixer valve - unique easy-fit system Built-in valve
The built-in valve is factory fitted, which means that on site you simply need to connect the mixer to the hot and cold feeds on the reverse of the valve and connect the showerhose via the bulkhead. The rest of the shower Anti-ligature sprayhead For special commercial application an anti-ligature fixed sprayhead is also available.
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
A unique mounting plate is factory fitted to the pod wall.
|
The mixer simply connects to the hot and cold feeds with the valve nuts.
|
Flexible pipes hang down the back of the unit.
|
The pipes are accessed via the removable panel at the front of the base, allowing easy attachment to the piped supplies with the push-fit connectors provided.
|
|||
![]() |
![]() |
Coram’s shower doors have been designed to be faster and easier to fit than any other on the market, which is why Coram have become a leading provider of shower enclosures to trade installers. Each shower door is supplied fully assembled, so that on site all that is required is to fit the handle and then install it using the wall channels as shown below. |
![]() |
|
![]() |
![]() |
![]() |
|
| When fitting the shower door the first thing is to position the wall channels and drill the screw holes. | The door is finally secured by drilling through the wall channels into the door frame and fixing with screws. | The wall channels are then slotted onto the door and screw fixed to the wall. | |
Write a review & share your thoughts with other shoppers!
Be the first to review this product
Write a review